ACCIÓN #110963 REF #110963
NEW-1975
SPECIFICATIONS: STOCK # 110963
Maximum Cone Distance....................... (30-Degree Spiral
Angle w/12" Dia Wheel)...................... 15"/(381mm)
Maximum Pitch Angle, 90-Degree Shaft 70-DEGREES, 34'
Minimum Pitch Angle, 90-Degree Shaft 5-DEGREES, 42'
Maximum Pitch Diameter: (90-Degree Shafts).:
0-degree spiral angle, 1:1 ratio 15.5"/(393.7mm)
0-degree spiral angle, 3:1 ratio 23"/(584.2mm)
30-degree spiral angle, 1:1 ratio 21"/(533.4mm)
30-degree spiral angle, 3:1 ratio 31.5"/(800.1mm)
40-degree spiral angle, 1:1 ratio 22.5"/(571.5mm)
40-degree spiral angle, 3:1 ratio 34"/(863.6mm)
Coarsest DP (Module)........................ 2 DP
Coarsest DP (Module) (Metric)............... (12.7-Module)
Maximum Face Width.......................... 3"/(76.2mm)
Work Spdl Taper Hole Dia.(Large End)........ 3-19/32"
Work Spindle Bore Taper (Per Ft)............ 39/64"
Work Spindle Thru-Hole Diameter............. 3.87"/(98mm)
Std Grind Wheel OD.......................... 6"-8"
Std Grind Wheel OD (Metric)................. (1852-203mm)
Max. Wkhead Offset Above/Below Ctr.......... 4.5"
Max. Wkhead Offset A/B Ctr (Metric)......... (114.3mm)
Distance From Machine Center To
Spindle Nose................................ 3"-20.5"
Distance From Machine Center To
Spindle Nose (Metric)....................... (76-500mm)
Feed Rate (Seconds Per Tooth)............... 1.9-11.8
Approx. Floor Space......................... 135" x 81"
Approx. Floor Space (Metric)................ (3429x2057mm)
Approx. Overall Machine Ht.................. 97"
Approx. Overall Mach Ht (Metric)............ (2464mm)
Approx. Machine Net Weight.................. 23,000 LBS.
Approx. Machine Net Weight (Metric.......... (10,455 kGs)
Suitable For The Grinding Of Spiral Bevel, Zerol Bevel, & Hypoid Gears
Up To 34" (864mm),
Pitch Diameter At 3:1 Ratio, 3" (76.2mm) Face Width & 2 DP
(12.5-Module)
PRICE....................: ${please call for price}
